Before you install, make sure you check out our Recommendations for optimal performance.

HAProxy Enterprise 2.1r1 is distributed through the Operating System package manager for the following Linux distributions.

images/os/icons8-centos.png
CentOS
8 7
images/os/icons8-debian.png
Debian
10 9
images/os/icons8-redhat.png
RedHat
8 7
images/os/icons8-ubuntu.png
Ubuntu
20.04 18.04 16.04
images/os/icons8-suse.png
SUSE
15.0
images/os/icons8-oracle.png
Oracle
8 7

Note

HAProxy Enterprise requires OpenSSL 1.1.1, which ships with updates or backport branches for certain Linux distributions ship. For example, in the case of Ubuntu 18.04, OpenSSL is defined in the 'bionic-updates' repository, which you must declare in your source lists.

The following procedure adds package repositories and installs HAProxy Enterprise 2.1r1. After the installation, you can install additional components to get the most out of your load balancer.

  • Run the following command on the server where you would like to install HAProxy Enterprise, replacing <HAProxy Enterprise Key> with the key you were given when you registered.

    $ curl -s https://cdn.haproxy.com/static/install_haproxy_enterprise.sh | sudo bash /dev/stdin 2.1r1 <HAProxy Enterprise key>
  • Start HAProxy Enterprise:

    $ sudo systemctl enable hapee-2.1-lb
    $ sudo systemctl start hapee-2.1-lb

    On older systems that do not have systemctl, use:

    $ sudo service hapee-2.1-lb start

Install additional modules

HAProxy Enterprise comes with additional native and third-party modules like the Real-time Dashboard. Packages are separated into three repositories, which you already added during the installation.

Package Repository

Description

Common

Contains the primary components for HAProxy Enterprise.

Plus

Contains add-on modules that extend HAProxy Enterprise.

Extras

Contains supporting software: SNMP, RHI, VRRP, etc.

  • See available packages.

  • This list is also available by running the following command:

    $ # On Debian/Ubuntu
    $ apt-cache search hapee-2.1r1
    
    $ # On CentOs/RedHat
    $ yum search hapee-2.1r1
    
    $ # On SUSE
    $ zypper search hapee-2.1r1
  • To find packages within the HAProxy Enterprise 'extras' repository, run:

    $ # On Debian/Ubuntu
    $ apt-cache search hapee-extras
    
    $ # On CentOs/RedHat
    $ yum search hapee-extras
    
    $ # On SUSE
    $ zypper search hapee-extras
  • Install a package using its name, for example:

    $ # On Debian/Ubuntu
    $ apt-get install hapee-2.1r1-lb-update
    
    $ # On CentOs/RedHat
    $ yum install hapee-2.1r1-lb-udpate
    
    $ # On SUSE
    $ zypper install hapee-2.1r1-lb-update
  • See other parts of this documentation for instructions on how to enable and configure each package.

Locate installed directories

HAProxy Enterprise files are installed following these rules:

  • Binaries and documentation are in /opt/hapee-2.1/

    /opt/hapee-2.1/
      |-- bin
      |-- certs
      |-- doc
      |-- misc
      |-- misc
      |-- modules
      \-- sbin
  • Configuration is installed in /etc/hapee-2.1/

    /etc/hapee-2.1/
      |-- hapee-lb.cfg
      |-- hapee-log.cfg
      |-- hapee-snmp.cfg
      |-- hapee-vrrp.cfg
  • init scripts are installed in /etc/init.d/

    /etc/init.d/
      |-- hapee-2.1
      |-- hapee-2.1-lb
      |-- hapee-extras-snmp-lb
      |-- hapee-extras-stktagg
      |-- hapee-extras-spoa-sso
      |-- hapee-extras-route
      |-- hapee-extras-rhi
      |-- hapee-extras-vrrp

Configure HAProxy Enterprise

After you complete the installation, you can configure HAProxy Enterprise using the instructions in the Configuration section from the left-hand menu bar.

Manual installation

The following section gives detailed information on how to install HAProxy Enterprise 2.1r1 its associated components manually on all supported Operating Systems.

Use this information if our Installation script doesn't work for your infrastructure or you would like to ccustomize your installation.

Instructions for CentOS 8

  • Create a new file /etc/yum.repos.d/hapee.repo if it does not exist and add the contents below. Replace <HAProxy Enterprise Key> with the key you were given when you registered.

    [hapee-base]
    name=hapee-base
    enabled=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/2.1r1/rhel-8/$basearch/bin/
    gpgcheck=1
    
    [hapee-plus]
    name=hapee-plus
    enabled=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/2.1r1/rhel-8/$basearch/bin/
    gpgcheck=1
    
    
    [hapee-plus-extras]
    name=hapee-plus-extras
    enabled=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/extras/rhel-8/$basearch/bin/
    gpgcheck=1
  • The packages that HAProxy Technologies provides are signed. To install them, you first must import the public key. Run the following command, replacing <HAProxy Enterprise Key> with the key you were given when you registered.

    $ rpm --import https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/HAPEE-key-2.1r1.asc
  • Update the repository cache:

    $ yum makecache
  • To install the load balancer, run:

    $ yum install -y hapee-2.1r1-lb

    Output of a successful installation:

    [...]
    Running Transaction
    Installing : hapee-2.1r1-base-2.1r1.0-16.0.noarch      1/2
    Note: you should edit /etc/sysctl.conf for system tuning.
    Installing : hapee-2.1r1-lb-2.1r1.0-67.20.x86_64       2/2
    Verifying  : hapee-2.1r1-base-2.1r1.0-16.0.noarch      1/2
    Verifying  : hapee-2.1r1-lb-2.1r1.0-67.20.x86_64       2/2
    Installed:
    hapee-2.1r1-lb.x86_64 0:2.1r1.0-67.20
    Dependency Installed:
    hapee-2.1r1-base.noarch 0:2.1r1.0-16.0
    Complete!
  • To start HAProxy Enterprise, run:

    $ sudo systemctl enable hapee-2.1-lb
    $ sudo systemctl start hapee-2.1-lb
  • If you have installed Rsyslog, restart it now to begin collecting HAProxy logs:

    $ sudo systemctl restart rsyslog

Instructions for CentOS 7

  • Create a new file /etc/yum.repos.d/hapee.repo if it does not exist and add the contents below. Replace <HAProxy Enterprise Key> with the key you were given when you registered.

    [hapee-base]
    name=hapee-base
    enabled=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/2.1r1/rhel-7/$basearch/bin/
    gpgcheck=1
    
    [hapee-plus]
    name=hapee-plus
    enabled=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/2.1r1/rhel-7/$basearch/bin/
    gpgcheck=1
    
    
    [hapee-plus-extras]
    name=hapee-plus-extras
    enabled=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/extras/rhel-7/$basearch/bin/
    gpgcheck=1
  • The packages that HAProxy Technologies provides are signed. To install them, you first must import the public key. Run the following command, replacing <HAProxy Enterprise Key> with the key you were given when you registered.

    $ rpm --import https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/HAPEE-key-2.1r1.asc
  • Update the repository cache:

    $ yum makecache
  • To install the load balancer, run:

    $ yum install -y hapee-2.1r1-lb

    Output of a successful installation:

    [...]
    Running Transaction
    Installing : hapee-2.1r1-base-2.1r1.0-16.0.noarch      1/2
    Note: you should edit /etc/sysctl.conf for system tuning.
    Installing : hapee-2.1r1-lb-2.1r1.0-67.20.x86_64       2/2
    Verifying  : hapee-2.1r1-base-2.1r1.0-16.0.noarch      1/2
    Verifying  : hapee-2.1r1-lb-2.1r1.0-67.20.x86_64       2/2
    Installed:
    hapee-2.1r1-lb.x86_64 0:2.1r1.0-67.20
    Dependency Installed:
    hapee-2.1r1-base.noarch 0:2.1r1.0-16.0
    Complete!
  • To start HAProxy Enterprise, run:

    $ sudo systemctl enable hapee-2.1-lb
    $ sudo systemctl start hapee-2.1-lb
  • If you have installed Rsyslog, restart it now to begin collecting HAProxy logs:

    $ sudo systemctl restart rsyslog

Instructions for Debian 10

  • Create a new file /etc/apt/sources.list.d/hapee.list if it does not exist and add the contents below. Replace <HAProxy Enterprise Key> with the key you were given when you registered.

    deb [arch=amd64] https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/2.1r1/debian-buster/amd64/ buster main
    deb [arch=amd64] https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/2.1r1/debian-buster/amd64/ buster main
    deb [arch=amd64] https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/extras/debian-buster/amd64/ buster main
  • Install required dependencies:

    $ sudo apt-get install --yes apt-transport-https dirmngr gnupg-agent
  • The packages that HAProxy Technologies provides are signed. To install them, you first must import the public key. Run the following command, replacing <HAProxy Enterprise Key> with the key you were given when you registered.

    $ wget -O - https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/HAPEE-key-2.1r1.asc | sudo apt-key add -
  • Update the repository cache:

    $ sudo apt-get update
  • To install the load balancer, run:

    $ sudo apt-get install hapee-2.1r1-lb

    Output of a successful installation:

    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    The following extra packages will be installed:
           hapee-2.1r1-base openssl
    Suggested packages:
           ca-certificates
    The following NEW packages will be installed:
           hapee-2.1r1-base hapee-2.1r1-lb openssl
    0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
    [...]
  • To start HAProxy Enterprise, run:

    $ sudo systemctl enable hapee-2.1-lb
    $ sudo systemctl start hapee-2.1-lb
  • If you have installed Rsyslog, restart it now to begin collecting HAProxy logs:

    $ sudo systemctl restart rsyslog

Instructions for Debian 9

  • Create a new file /etc/apt/sources.list.d/hapee.list if it does not exist and add the contents below. Replace <HAProxy Enterprise Key> with the key you were given when you registered.

    deb [arch=amd64] https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/2.1r1/debian-stretch/amd64/ stretch main
    deb [arch=amd64] https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/2.1r1/debian-stretch/amd64/ stretch main
    deb [arch=amd64] https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/extras/debian-stretch/amd64/ stretch main
  • Install required dependencies:

    $ sudo apt-get install --yes apt-transport-https dirmngr gnupg-agent
  • The packages that HAProxy Technologies provides are signed. To install them, you first must import the public key. Run the following command, replacing <HAProxy Enterprise Key> with the key you were given when you registered.

    $ wget -O - https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/HAPEE-key-2.1r1.asc | sudo apt-key add -
  • Update the repository cache:

    $ sudo apt-get update
  • To install the load balancer, run:

    $ sudo apt-get install hapee-2.1r1-lb

    Output of a successful installation:

    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    The following extra packages will be installed:
           hapee-2.1r1-base openssl
    Suggested packages:
           ca-certificates
    The following NEW packages will be installed:
           hapee-2.1r1-base hapee-2.1r1-lb openssl
    0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
    [...]
  • To start HAProxy Enterprise, run:

    $ sudo systemctl enable hapee-2.1-lb
    $ sudo systemctl start hapee-2.1-lb
  • If you have installed Rsyslog, restart it now to begin collecting HAProxy logs:

    $ sudo systemctl restart rsyslog

Instructions for RedHat 8

  • Create a new file /etc/yum.repos.d/hapee.repo if it does not exist and add the contents below. Replace <HAProxy Enterprise Key> with the key you were given when you registered.

    [hapee-base]
    name=hapee-base
    enabled=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/2.1r1/rhel-8/$basearch/bin/
    gpgcheck=1
    
    [hapee-plus]
    name=hapee-plus
    enabled=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/2.1r1/rhel-8/$basearch/bin/
    gpgcheck=1
    
    
    [hapee-plus-extras]
    name=hapee-plus-extras
    enabled=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/extras/rhel-8/$basearch/bin/
    gpgcheck=1
  • The packages that HAProxy Technologies provides are signed. To install them, you first must import the public key. Run the following command, replacing <HAProxy Enterprise Key> with the key you were given when you registered.

    $ rpm --import https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/HAPEE-key-2.1r1.asc
  • Update the repository cache:

    $ yum makecache
  • To install the load balancer, run:

    $ yum install -y hapee-2.1r1-lb

    Output of a successful installation:

    [...]
    Running Transaction
    Installing : hapee-2.1r1-base-2.1r1.0-16.0.noarch      1/2
    Note: you should edit /etc/sysctl.conf for system tuning.
    Installing : hapee-2.1r1-lb-2.1r1.0-67.20.x86_64       2/2
    Verifying  : hapee-2.1r1-base-2.1r1.0-16.0.noarch      1/2
    Verifying  : hapee-2.1r1-lb-2.1r1.0-67.20.x86_64       2/2
    Installed:
    hapee-2.1r1-lb.x86_64 0:2.1r1.0-67.20
    Dependency Installed:
    hapee-2.1r1-base.noarch 0:2.1r1.0-16.0
    Complete!
  • To start HAProxy Enterprise, run:

    $ sudo systemctl enable hapee-2.1-lb
    $ sudo systemctl start hapee-2.1-lb
  • If you have installed Rsyslog, restart it now to begin collecting HAProxy logs:

    $ sudo systemctl restart rsyslog

Instructions for RedHat 7

  • Create a new file /etc/yum.repos.d/hapee.repo if it does not exist and add the contents below. Replace <HAProxy Enterprise Key> with the key you were given when you registered.

    [hapee-base]
    name=hapee-base
    enabled=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/2.1r1/rhel-7/$basearch/bin/
    gpgcheck=1
    
    [hapee-plus]
    name=hapee-plus
    enabled=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/2.1r1/rhel-7/$basearch/bin/
    gpgcheck=1
    
    
    [hapee-plus-extras]
    name=hapee-plus-extras
    enabled=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/extras/rhel-7/$basearch/bin/
    gpgcheck=1
  • The packages that HAProxy Technologies provides are signed. To install them, you first must import the public key. Run the following command, replacing <HAProxy Enterprise Key> with the key you were given when you registered.

    $ rpm --import https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/HAPEE-key-2.1r1.asc
  • Update the repository cache:

    $ yum makecache
  • To install the load balancer, run:

    $ yum install -y hapee-2.1r1-lb

    Output of a successful installation:

    [...]
    Running Transaction
    Installing : hapee-2.1r1-base-2.1r1.0-16.0.noarch      1/2
    Note: you should edit /etc/sysctl.conf for system tuning.
    Installing : hapee-2.1r1-lb-2.1r1.0-67.20.x86_64       2/2
    Verifying  : hapee-2.1r1-base-2.1r1.0-16.0.noarch      1/2
    Verifying  : hapee-2.1r1-lb-2.1r1.0-67.20.x86_64       2/2
    Installed:
    hapee-2.1r1-lb.x86_64 0:2.1r1.0-67.20
    Dependency Installed:
    hapee-2.1r1-base.noarch 0:2.1r1.0-16.0
    Complete!
  • To start HAProxy Enterprise, run:

    $ sudo systemctl enable hapee-2.1-lb
    $ sudo systemctl start hapee-2.1-lb
  • If you have installed Rsyslog, restart it now to begin collecting HAProxy logs:

    $ sudo systemctl restart rsyslog

Instructions for Ubuntu 20.04

  • Create a new file /etc/apt/sources.list.d/hapee.list if it does not exist and add the contents below. Replace <HAProxy Enterprise Key> with the key you were given when you registered.

    deb [arch=amd64] https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/2.1r1/ubuntu-20.04/amd64/ focal main
    deb [arch=amd64] https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/2.1r1/ubuntu-20.04/amd64/ focal main
    deb [arch=amd64] https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/extras/ubuntu-20.04/amd64/ focal main
  • Install required dependencies:

    $ sudo apt-get install --yes apt-transport-https dirmngr gnupg-agent
  • The packages that HAProxy Technologies provides are signed. To install them, you first must import the public key. Run the following command, replacing <HAProxy Enterprise Key> with the key you were given when you registered.

    $ wget -O - https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/HAPEE-key-2.1r1.asc | sudo apt-key add -
  • Update the repository cache:

    $ sudo apt-get update
  • To install the load balancer, run:

    $ sudo apt-get install hapee-2.1r1-lb

    Output of a successful installation:

    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    The following extra packages will be installed:
           hapee-2.1r1-base openssl
    Suggested packages:
           ca-certificates
    The following NEW packages will be installed:
           hapee-2.1r1-base hapee-2.1r1-lb openssl
    0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
    [...]
  • To start HAProxy Enterprise, run:

    $ sudo systemctl enable hapee-2.1-lb
    $ sudo systemctl start hapee-2.1-lb
  • If you have installed Rsyslog, restart it now to begin collecting HAProxy logs:

    $ sudo systemctl restart rsyslog

Instructions for Ubuntu 18.04

  • Create a new file /etc/apt/sources.list.d/hapee.list if it does not exist and add the contents below. Replace <HAProxy Enterprise Key> with the key you were given when you registered.

    deb [arch=amd64] https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/2.1r1/ubuntu-18.04/amd64/ bionic main
    deb [arch=amd64] https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/2.1r1/ubuntu-18.04/amd64/ bionic main
    deb [arch=amd64] https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/extras/ubuntu-18.04/amd64/ bionic main
  • Install required dependencies:

    $ sudo apt-get install --yes apt-transport-https dirmngr gnupg-agent
  • The packages that HAProxy Technologies provides are signed. To install them, you first must import the public key. Run the following command, replacing <HAProxy Enterprise Key> with the key you were given when you registered.

    $ wget -O - https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/HAPEE-key-2.1r1.asc | sudo apt-key add -
  • Update the repository cache:

    $ sudo apt-get update
  • To install the load balancer, run:

    $ sudo apt-get install hapee-2.1r1-lb

    Output of a successful installation:

    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    The following extra packages will be installed:
           hapee-2.1r1-base openssl
    Suggested packages:
           ca-certificates
    The following NEW packages will be installed:
           hapee-2.1r1-base hapee-2.1r1-lb openssl
    0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
    [...]
  • To start HAProxy Enterprise, run:

    $ sudo systemctl enable hapee-2.1-lb
    $ sudo systemctl start hapee-2.1-lb
  • If you have installed Rsyslog, restart it now to begin collecting HAProxy logs:

    $ sudo systemctl restart rsyslog

Instructions for Ubuntu 16.04

  • Create a new file /etc/apt/sources.list.d/hapee.list if it does not exist and add the contents below. Replace <HAProxy Enterprise Key> with the key you were given when you registered.

    deb [arch=amd64] https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/2.1r1/ubuntu-16.04/amd64/ xenial main
    deb [arch=amd64] https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/2.1r1/ubuntu-16.04/amd64/ xenial main
    deb [arch=amd64] https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/extras/ubuntu-16.04/amd64/ xenial main
  • Install required dependencies:

    $ sudo apt-get install --yes apt-transport-https dirmngr gnupg-agent
  • The packages that HAProxy Technologies provides are signed. To install them, you first must import the public key. Run the following command, replacing <HAProxy Enterprise Key> with the key you were given when you registered.

    $ wget -O - https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/HAPEE-key-2.1r1.asc | sudo apt-key add -
  • Update the repository cache:

    $ sudo apt-get update
  • To install the load balancer, run:

    $ sudo apt-get install hapee-2.1r1-lb

    Output of a successful installation:

    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    The following extra packages will be installed:
           hapee-2.1r1-base openssl
    Suggested packages:
           ca-certificates
    The following NEW packages will be installed:
           hapee-2.1r1-base hapee-2.1r1-lb openssl
    0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
    [...]
  • To start HAProxy Enterprise, run:

    $ sudo systemctl enable hapee-2.1-lb
    $ sudo systemctl start hapee-2.1-lb
  • If you have installed Rsyslog, restart it now to begin collecting HAProxy logs:

    $ sudo systemctl restart rsyslog

Instructions for SUSE 15.0

  • Create a new file /etc/zypp.repos.d/hapee.repo if it does not exist and add the contents below. Replace <HAProxy Enterprise Key> with the key you were given when you registered.

    [hapee-base]
    name=HAProxy Enterprise Base
    enabled=1
    autorefresh=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/2.1r1/suse-15.0/x86_64/bin/
    path=/
    type=rpm-md
    keeppackages=0
    
    [hapee-plus]
    name=HAProxy Enterprise Base
    enabled=1
    autorefresh=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/2.1r1/suse-15.0/x86_64/bin/
    path=/
    type=rpm-md
    keeppackages=0
    
    [hapee-plus-extras]
    name=HAProxy Enterprise Base
    enabled=1
    autorefresh=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/extras/suse-15.0/x86_64/bin/
    path=/
    type=rpm-md
    keeppackages=0
  • The packages that HAProxy Technologies provides are signed. To install them, you first must import the public key. Run the following command, replacing <HAProxy Enterprise Key> with the key you were given when you registered.

    $ rpm --import https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/HAPEE-key-2.1r1.asc
  • Update the repository cache:

    $ zypper makecache
  • To install the load balancer, run:

    $ zypper install -y hapee-2.1r1-lb

    Output of a successful installation:

    [...]
    The following 3 NEW packages are going to be installed:
    hapee-2.1r1-base hapee-2.1r1-lb libpcreposix0
    
    3 new packages to install.
    Overall download size: 3.6 MiB. Already cached: 0 B. After the operation, additional 13.9 MiB will be used.
    Continue? [y/n/v/...? shows all options] (y): y
    Retrieving package hapee-2.1r1-base-1.0.0-91.0.noarch (1/3), 13.4 KiB ( 18.6 KiB unpacked)
    Retrieving: hapee-2.1r1-base-1.0.0-91.0.suse-15.0.noarch.rpm .........................................................................................................................................[done]
    Retrieving package libpcreposix0-8.41-lp151.5.67.x86_64 (2/3), 16.6 KiB ( 10.1 KiB unpacked)
    Retrieving: libpcreposix0-8.41-lp151.5.67.x86_64.rpm ....................................................................................................................................[done (19.0 KiB/s)]
    Retrieving package hapee-2.1r1-lb-1.0.0-217.640.x86_64 (3/3), 3.5 MiB ( 13.9 MiB unpacked)
    Retrieving: hapee-2.1r1-lb-1.0.0-217.640.suse-15.0.x86_64.rpm ............................................................................................................................[done (1.1 MiB/s)]
    
    Checking for file conflicts: .........................................................................................................................................................................[done]
    (1/3) Installing: hapee-2.1r1-base-1.0.0-91.0.noarch .................................................................................................................................................[done]
    Additional rpm output:
    Note: you should edit /etc/sysctl.d/hapee-2.1.conf for system tuning.
    
    (2/3) Installing: libpcreposix0-8.41-lp151.5.67.x86_64 ...............................................................................................................................................[done]
    (3/3) Installing: hapee-2.1r1-lb-1.0.0-217.640.x86_64 .........................................................................................[done]
  • To start HAProxy Enterprise, run:

    $ sudo systemctl enable hapee-2.1-lb
    $ sudo systemctl start hapee-2.1-lb
  • If you have installed Rsyslog, restart it now to begin collecting HAProxy logs:

    $ sudo systemctl restart rsyslog

Instructions for Oracle 8

  • Create a new file /etc/yum.repos.d/hapee.repo if it does not exist and add the contents below. Replace <HAProxy Enterprise Key> with the key you were given when you registered.

    [hapee-base]
    name=hapee-base
    enabled=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/2.1r1/rhel-8/$basearch/bin/
    gpgcheck=1
    
    [hapee-plus]
    name=hapee-plus
    enabled=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/2.1r1/rhel-8/$basearch/bin/
    gpgcheck=1
    
    
    [hapee-plus-extras]
    name=hapee-plus-extras
    enabled=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/extras/rhel-8/$basearch/bin/
    gpgcheck=1
  • The packages that HAProxy Technologies provides are signed. To install them, you first must import the public key. Run the following command, replacing <HAProxy Enterprise Key> with the key you were given when you registered.

    $ rpm --import https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/HAPEE-key-2.1r1.asc
  • Update the repository cache:

  • To install the load balancer, run:

    $ yum install -y hapee-2.1r1-lb

    Output of a successful installation:

    [...]
    Running Transaction
    Installing : hapee-2.1r1-base-2.1r1.0-16.0.noarch      1/2
    Note: you should edit /etc/sysctl.conf for system tuning.
    Installing : hapee-2.1r1-lb-2.1r1.0-67.20.x86_64       2/2
    Verifying  : hapee-2.1r1-base-2.1r1.0-16.0.noarch      1/2
    Verifying  : hapee-2.1r1-lb-2.1r1.0-67.20.x86_64       2/2
    Installed:
    hapee-2.1r1-lb.x86_64 0:2.1r1.0-67.20
    Dependency Installed:
    hapee-2.1r1-base.noarch 0:2.1r1.0-16.0
    Complete!
  • To start HAProxy Enterprise, run:

    $ sudo systemctl enable hapee-2.1-lb
    $ sudo systemctl start hapee-2.1-lb
  • If you have installed Rsyslog, restart it now to begin collecting HAProxy logs:

    $ sudo systemctl restart rsyslog

Instructions for Oracle 7

  • Create a new file /etc/yum.repos.d/hapee.repo if it does not exist and add the contents below. Replace <HAProxy Enterprise Key> with the key you were given when you registered.

    [hapee-base]
    name=hapee-base
    enabled=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/2.1r1/rhel-7/$basearch/bin/
    gpgcheck=1
    
    [hapee-plus]
    name=hapee-plus
    enabled=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/2.1r1/rhel-7/$basearch/bin/
    gpgcheck=1
    
    
    [hapee-plus-extras]
    name=hapee-plus-extras
    enabled=1
    baseurl=https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-plus/extras/rhel-7/$basearch/bin/
    gpgcheck=1
  • The packages that HAProxy Technologies provides are signed. To install them, you first must import the public key. Run the following command, replacing <HAProxy Enterprise Key> with the key you were given when you registered.

    $ rpm --import https://www.haproxy.com/download/hapee/key/<HAProxy Enterprise Key>-common/HAPEE-key-2.1r1.asc
  • Update the repository cache:

  • To install the load balancer, run:

    $ yum install -y hapee-2.1r1-lb

    Output of a successful installation:

    [...]
    Running Transaction
    Installing : hapee-2.1r1-base-2.1r1.0-16.0.noarch      1/2
    Note: you should edit /etc/sysctl.conf for system tuning.
    Installing : hapee-2.1r1-lb-2.1r1.0-67.20.x86_64       2/2
    Verifying  : hapee-2.1r1-base-2.1r1.0-16.0.noarch      1/2
    Verifying  : hapee-2.1r1-lb-2.1r1.0-67.20.x86_64       2/2
    Installed:
    hapee-2.1r1-lb.x86_64 0:2.1r1.0-67.20
    Dependency Installed:
    hapee-2.1r1-base.noarch 0:2.1r1.0-16.0
    Complete!
  • To start HAProxy Enterprise, run:

    $ sudo systemctl enable hapee-2.1-lb
    $ sudo systemctl start hapee-2.1-lb
  • If you have installed Rsyslog, restart it now to begin collecting HAProxy logs:

    $ sudo systemctl restart rsyslog