To upgrade to HAProxy Enterprise 2.0r1 from a previous version you will need to install HAProxy Enterprise 2.0r1 and any additional modules you were using before you can switch to it and uninstall the previous version.

Supported Operating Systems

HAProxy Enterprise can be upgraded to version 2.0r1 on the following Operating Systems.

8 7
10 9 8
8 7
18.04 16.04

Upgrade to HAProxy Enterprise 2.0r1

The following upgrade procedure installs a new major version of HAProxy Enterprise.

  1. Take the server that you want to upgrade out of the cluster.

  2. Install HAProxy Enterprise 2.0r1 by running the following command and replacing <HAProxy Enterprise Key> with the key you received when you registered:

    curl -s | sudo bash /dev/stdin 2.0r1 <HAProxy Enterprise key>
  3. Update additional modules: you may be running additional modules with HAProxy Enterprise, which you must also reinstall when you upgrade to a new release. Install a package using its name, for example:

    # On Debian or Ubuntu
    sudo apt-get install hapee-2.0r1-lb-update
    # On CentOS or RedHat
    yum install hapee-2.0r1-lb-udpate
    # On SUSE
    zypper install hapee-2.0r1-lb-update
  4. Copy /etc/hapee-[previousversion]/hapee-lb.cfg over to /etc/hapee-2.0/hapee-lb.cfg and any associated files (maps/certificates/etc).

  5. Disable the old HAProxy Enterprise version from starting with the system, as follows:

    systemctl disable hapee-<previousversion>-lb
  6. Ensure that the new HAProxy Enterprise version starts with the system, as follows:

    systemctl enable hapee-2.0-lb
  7. Stop the old HAProxy Enterprise daemon and start the new daemon:

    systemctl hapee-<previousversion>-lb stop
    systemctl hapee-2.0-lb start

    On older systems that do not have systemctl, use:

    sudo service hapee-2.0-lb start
  8. Run tail -f /var/log/syslog (or distribution equivalent) to check for warnings or errors.

  9. Run wget localhost to ensure that HAProxy is responding. Adjust address/port as needed, and use a local address that is currently active on the box and not a VRRP IP.

  10. Put the upgraded server back into the cluster.

  11. Repeat this procedure on secondary servers.


For the additional modules, see their corresponding documentations for instructions on how to enable and configure each package.

After the new HAProxy Enterprise version has been running for a while, you can uninstall the old HAProxy Enterprise version. To uninstall a package:

# On RedHat or CentOS
yum remove <package_name>

# On Debian or Ubuntu
apt purge <package_name>

zypper remove <package_name>

Updating HAProxy Enterprise

The update procedure installs the latest build for your current HAProxy Enterprise version in order to benefit from the latest bug fixes.

# On CentOS or RedHat
yum update

# On Debian or Ubuntu
apt update
apt upgrade

zypper update